Continuous micro-flow metering with LEWA intellidrive

In a test rig for gas combustion engines, it was tested if small amounts of residual oil in LPG may have adverse effects on the operation of the gas engine. Therefore, a continuous, very small oil flow rate was required in the testing unit.

With a LEWA metering system and the intelligent drive unit LEWA intellidrive, we developed a solution which is able to realize flow rates of only 1 ml/h.

Metering of very small amounts down to 1 ml/h.

LEWA intellidrive for micro-metering tasks.

For this application, LEWA developed a metering system with intellidrive technology:

  • Metering system with LEWA ecoflow packed plunger metering pump for the precise and economic metering of uncritical fluids
  • Quasi-continuous, constant metering of the oil in very small amounts (down to 1 ml/h)
  • The drive unit LEWA intellidrive provides intelligent motion control. This enables metering highly viscous fluids and smallest flow rates, even with very large turn-down ratios.
  • With the control panel, you can adjust settings such as flow rate setpoints, timers, speed control, etc. You can switch between different modes.
  • An adaptive flow control is possible: The flow rate is kept constant via an internal pump pressure measurement and the data of the piston's movement even under changing operating conditions. The costly use of a flow meter is omitted.
Intellidrive for the metering of small quantities

Technical functionality of the metering system in detail

To test whether oil components in liquefied gas have harmful effects on gas combustion engines, extremely small amounts should be guided to oil in a corresponding test stand. To do so, LEWA developed a metering system consisting of an ecoflow piston pump on a support frame, a LEWA intellidrive drive system, a storage container and the associated piping. In addition, a switch box with a control system and all required operating elements were contained in the scope of delivery.

The metering system works according to the principle of adaptive masses or volume flow control. For this purpose, a so-called h0 provision is carried out in the compression phase during continuous operation, i.e. the piston is moved to the rear dead center after the suction phase beginning at the point where the inner pressure is the same as the outer system pressure. Based on this point (h0), the calculation of the necessary stroke frequency needed to achieve the specified target volume flow (e. g. Qtarget = 1 ml/h) is carried out.

The change to the h0 value, i.e. the change in pump efficiency, that occurs due to small air bubbles, for example, is recorded for each individual pump stroke and corrected by recalculating the stroke frequency correctly (adaptive mass or volume flow control). No flow meter is used. Different parameter settings can be set on the provided operating panel.

Pumps for the metering of small quantities: LEWA intellidrive

LEWA solutions for microflow metering applications

Micoflow pumps for the metering of small quantities: LEWA intellidrive

In applications which require addition of smallest amounts of a fluid, LEWA can provide different solutions: In addition to the intellidrive technology, we offer more microflow metering pumps for different requirements such our pump series MAH, MBH, and MLM as well as the FC series.  With our microflow metering solutions, you can always realize flow rates from 1 ml/h to 65 l/h at conveying pressures from 1 to 560 bar.

We will be happy to advise you on the best solution for your application!

Industries

Robust metering solutions for the use in the Chemical industry
Chemicals  industry

Chemical Pumps and Metering Packages for the Chemical Industry

When critical, environmentally hazardous, toxic, or flammable fluids and suspensions need to be reliably conveyed or metered in high-pressure processes, there is no alternative to hermetically sealed metering pumps, process diaphragm pumps, and metering systems from LEWA. Hermetically sealed LEWA pumps with pressures up to 1200 bar are the first choice for the production of chemical intermediate and end products. Contact our experts and let us advise you about your individual chemical pump or system solution!

More Details
For energy utilities LEWA provides customer specific pumping solutions
Energy industry

Metering Packages and Pumps for Power Plants and Power Suppliers

LEWA supports power plant operators and power suppliers with pumps and systems for conveying, metering, and mixing different fluids. We not only provide power plants with our products, but also develop solutions for wastewater treatment plants, gas bottlers, biogas producers, regional power suppliers, and hydrogen producers.

More Details
LEWA solutions are found also in other industries, for example in the Varnish- and Lacquer industry
LEWA solutions are found also in other industries

Pumps and Metering Systems for Other Industries

LEWA offers customized solutions and references for almost all industries in which processes require exact metering or the reliable conveyance of fluids. As specialists in fluid handling, we of course also have experience in areas outside of our key markets.

More Details

Products

LEWA ecoflow diaphragm metering pump all around talent

LEWA ecoflow® Diaphragm Metering Pump

LEWA ecoflow: The Innovative Universal Metering Pump with DPS Diaphragm Protection. Trusted across all industries, this modular system pump excels in a wide range of applications. Experience unparalleled versatility and reliability with our ecoflow, the ultimate choice in metering pump technology.

More Details
LEWA ecoflow packed plunger pump

LEWA ecoflow® Packed Plunger Metering Pumps

Opt for the LEWA ecoflow packed plunger metering pump, a robust and reliable choice for hassle-free fluid metering. Available in multiple models to suit diverse processes, it's the metering pump trusted by industry leaders for consistent performance.

More Details
LEWA intellidrive diaphragm metering pump

LEWA intellidrive®:Mechatronic Diaphragm Metering Pump Technology

Customize both suction and discharge strokes to fit your precise specifications with the LEWA intellidrive® diaphragm metering pump. This technology allows you to individually shape pumping characteristics, ensuring optimal metering for your applications.

More Details
LEWA micrometering pumps

LEWA MAH, MBH, MLM Series: Micro-Metering Pumps

Discover our metering pumps designed for ultra-low flow rates, offering an exceptionally cost-effective solution for proportional metering of fluid components to variable reference values. Ideal for precision applications.

More Details
LEWA FC laboratory pumps

LEWA FC: High-Precision Laboratory Metering Pumps

Explore our precision metering pumps designed for micro-flow rates. The FC series, capable of handling pressures up to 400 bar, is tailor-made for laboratory and test center applications, offering unparalleled accuracy for small-scale fluid management.

More Details

Keep in touch with us

Get insights into our products and applications for liquid metering. You will also receive all the latest news about LEWA as well as invitations to our exclusive events.

Social Media

LEWA is on LinkedinLEWA is on YouTubeLEWA is on Instagram

©2024 LEWA GmbH  Terms & Conditions Privacy Imprint